The busbar system provides easy installation, long and economical life, less end-of-line voltage conversion, mechanical and thermal durability, safety, convenience and options in electrical transmission and distribution.

In order to prevent the busbar system from being affected by corrosion, the outer casings are made of Aluminum materials. Busbars can be manufactured as painted upon request.

25-100 A Busbar systems are standard 3m. 160-1000A and 400-6300A Busbar systems are standard 4m. length is produced. Thus, since there will be less addition at high currents, problems that may occur in the transition resistors are prevented.

It is a very simple and patented solution that enables us to access and control all accessible information such as status information and measurement values ​​from measurement devices on transformers, panels, busbars, and outlet boxes, with bidirectional communication over power lines.

Relevant information and controls can be accessed from any PC with G-Bus software installed and connected to a local or internet network.

With the GERSAN Smart Busbar system, measurement, control and monitoring can be performed with transmitter and receiver units to be mounted between GNL, GL, GGD and GS and 25-6300A in all Busbar systems. Analyzer measurements, switch controls, etc. as G-Bus signals, with the structure in DIN Rail standards, so that the relevant units can be easily mounted on the outlet boxes. They can process bidirectional information and commands.